Three PhD students in medical physics
The University Institute for Radiation Physics (IRA), part of the University Hospital (CHUV) and the University (UNIL) of Lausanne develops its activities in the fields of ionizing radiations in medicine and the protection of workers and the public against ionizing radiations. It collaborates with EPFL for thesis follow-ups and is looking for:
User Review
( votes)Three PhD students in medical physics
Proposed research subjects:
· Optimization of CT-scanner pediatric and young adults protocols (within a project financed by the Swiss National Fund for Research) – ref. 245 ;
· Modelization of the detection process in new radiation diagnostic techniques – ref. 246;
· Optimization of doses in tomotherapy – ref. 247.
Each of these research subjects will lead to close links with clinical activities in the framework of specific courses given within the doctoral school of UNIL.
During the thesis work, the PhD students will have the possibility to obtain the professional board certification in medical physics (similar to the physicians’ FMH). The PhD students will also take part in the services as well as teaching activities of the institute.
Position requirements:
· Master in sciences;
· Strong interest for research;
· Nimble-mindeness, sense of collaboration, creativity, good analytical and synthesis capacities;
· Working language: French or English.
Application deadline: 31 August 2008
More information:
Francis R. Verdun, tel. +41 (0)21 623 34 70
François Bochud, tel. +41 (0)21 623 34 40
If you are interested by a new professional challenge offering the advantages of Civil Service and good wage conditions, do not hesitate to send us your application documents (with an application letter, CV, certificates and copies of degrees) to the following address:
Département Universitaire de Médecine et Santé Communautaires – DUMSC, Ressources humaines, ref. 245, 246 or 247 (according to the chosen research subject), rue du Bugnon 44, 1011 Lausanne, [email protected]
Sir
I have done M.Sc. Physics from a univ of repute from north India with a gold medal. Sir through out my academic carrer i have secured very good marks . I have very strong interest in doing research work in medical physics. Please oblige by guiding me about this.
Regards.
Hello Mr/Madam. I graduated in MSc. in Physics from Shiraz university in Iran ten years ago and have 7 years work experience. I want to continue my education in PhD. with free scholarship in a Western country university. Please help me about how can I apply and get free scholarship.
Sincerrely Yours.
Bahman.
Go to Previous message | Go to Next message | Back to MessagesMark as Unread | Print ReplyReply All Move…Inbox
Flag this messageurgent askingMonday, March 30, 2009 2:26 PM
From: “Saeed Hajian” Add sender to ContactsTo: [email protected] Sir,
I’m glad to introduce myself that I’m Saeed Hajian PhD student of radiation medical Eng.(medical imaging) in Iran (my B.S. was about biomedical Eng.)and want to continue my education in your university, could you help me?
I look forward to hearing from you.
Sincerely yours
Dear sir/madam
I am M.Sc. in Nuclear Physics from Department of Physics,university of Bombay,After that I have done Post M.Sc. Diploma in Radiological Physics from Bhabha Atomic Research Center.
I have secured admission in University of wollongong for Ph.d. in Radiation Physics but I could not get the scholarship for that from the University.My term Starts from March 2009 and I am badly in search for financial support as I do not have the huge amount of money required to complete the ph.d. on my own and do not have any other resource for money not even from family side.
can you please guide me in this as the subject I got is really important not only for me but also for Radiotherapy cancer treatment in India.
Hope for reply from your side.
Dear sir/madam
I am M.Sc. in Nuclear Physics from Department of Physics,university of Bombay,After that I have done Post M.Sc. Diploma in Radiological Physics from Bhabha Atomic Research Center.
I have secured admission in Univeristy of wollongong for Ph.d. in Radiation Physics but I could not get the scholarship for that from the University.My term Starts from March 2009 and I am badly in search for finacial suport as I do not have the huge amount of money required to complete the ph.d. on my own and do not have any other resource for money not even from family side.
can you please guide me in this as the subject I got is realy important not only for me but also for Radiotherapy cancer treatment in India.
Hope for reply from your side.
Engr.Shahjahan Kabir
B.Sc (H) M.Sc (Phy & Electronics), First class
PGDSI (ISI) UGC, PLC (TICI) BCIC, First class
Applied Electronics & Microcontroller, First class
[email protected]
[email protected]
http://WWW.SHR2SHR.COM
PRESENT ADDRESS
131/A, East Rajabazar Farmgate, Dhaka-1215
Ph-8151115, 8150060
Cell:01911559050
01191213131
PARMANENT ADDRESS
Vill: Guthai, P.O: Gilabari,
P.S: Islampur
Dist: Jamalpur
Bangladesh
OBJECTIVE
To work in an organization, which offer a competitive, and performance based environment and nourish the talents abilities for the development of the organization and an employee as well.
SUMMARY
Completed Post Graduate Diploma in Scientific Instrumentation (PGDSI) (one year, 48 credits) from Institute of Scientific Instrumentation (ISI) University Grants Commission of Bangladesh (UGC) and obtained A+. (Syllabus Hints: Electrical & Electronics Fundamentals & Lab, Digital & Analog Electronics & Lab, Various type of Electrical and Electronics Instruments Measurement & Calibrations, Microcontroller, Microprocessor and Interfacing & Lab, Instrumentation & Lab, Control & Communication System & Lab, Power Electronics & Lab, Power Sub-station & Generator, Induction, Synchronous, Stepper & Brush Less Types Motor & etc).
Completed Programmable Logic Controller (PLC) and Programmable Instruments from Training Institute for Chemical Industries (TICI) (Central Training Institute of BCIC), Polash, Narsingdi, Bangladesh and obtained A+
Completed Microcontroller & Applied Electronics from Bangladesh Advanced Institute of Science & Technology. House-21/E, Road-1, Nikunja-2, Dhaka-1229 and obtained A+.
Completed M.Sc in Physics (with Honors) from Uttara University and obtained First class.
Completed the course of Computer Hardware from Systech Computers. House-17, Road-05, Sector-07, Dhaka-1230.
Completed the course of Computer Application from Systech Computers. Housee-17, Road-05, Sector-07, Dhaka-1230.
Have an idea about Manufacturer, Installation, Maintenance, Troubleshooting and Repairing of Analogue & Digital Medical and Industrial Instruments, Automation and Controls.
WORKING EXPERIENCE
Manager Maintenance (In-charge, Dhaka Office): From first January 2008 to Continue in SHORE TO SHORE (BD) Ltd, YUNUSCO K. TEXTILE LTD & STS TEXTILE LTD. (Multinational & ISO Certified company). Expert on All Kinds of Textile Machineries, Woven Label Machines, Cut & Fold Machines, Fabric Printing Label Machines, Offset Printing Machines. Any types of Air conditioner, All Kinds of Industrial Compressor. Generator, Power Sub-Station, Office Maintenance. 274,Tejgaon Industrial Area. Dhaka-1208, Bangladesh. http://www.shr2shr.com
Manager Maintenance (In-Charge): From October 2, 2004 to December 31, 2007 in China-American Medical Center Ltd. (CAMCEN, USA). Joint collaboration with Delta Medical College & Hospital (It may be mentioned here, it is the only private radiotherapy center in Bangladesh). Expert on Linear Accelerator, CT Scan, Mammography, CO-60, Simulator, Ultrasonogram X-ray, Power substation, Generators, Industrial Compressor, Air conditioner, Office Maintenance etc. 26/2 Darus Salam Road, Mirpur-1, Dhaka-1226.
Maintenance & Service Engineer: Form first January 2000 to first October 2004 in Samah Razor Blades Industries Ltd (A Member of GMG Group). Head Office: ABC House (9th Floor), 8, Kamal Ataturk Avenue, Banani C/A, Dhaka-1213.Factory: 247/248,Tejgaon Industrial Area, Dhaka-1208.
Electronics Instructor: From first January 2002 to 2005. Australasia Institute of Science & Technology. Applied Electrical & Electronics, Industrial Electronics, Control & Power Electronics, Motors. Awel Center, 34 kamal Ataturk Avenue, Banani, Dhaka.
WORKSHOP & LAB EXPERIENCE
Digitherm: (Manufacturer, Designer, Installation, Maintenance, Troubleshooting & Repairing of Analog & Digital Instruments Industrial & Medical Automation and Controls). Chief Executive, Engineer Azizul Islam (kamal). Expert on all kinds of Labels & Textile Machines.152/2 Green Road, Dhaka-1215.
Electronic Control Lab: (Installation, Maintenance,Troubleshooting & Repairing of all kind of Electronics Equipment of Industrial & Medical). Chief executive, Engineer Ziaul Haque, Associate professor, Institute of Scientific Instrumentation (ISI) under University Grants Commission of Bangladesh (UGC), Agargaon, Dhaka-1207.
Shathi Electronics Lab: (Maintenance, Troubleshooting, & Repairing of all kinds of electronics equipments of industrial & Medical) Proprietor, Md. Shahjahan Kabir, Instrument Engineer. 82/1 East Tejturi Bazar, farmgate, Dhaka-1215.
MANAGEMENT & REPAIRING EXPERIENCE
Four years practical experience as a Chief Executive in Solution Electronics & Technology (Installation, Maintenance, Troubleshooting & Repairing of all kinds of Electronics Equipment of Industrial & Medical). 53, West Razabazar, Indira road, Farmgate, Dhaka-1215.
Six years practical experience as a Founder & Director in Millennium Coaching Center. 28/1 Indira Road, Globe center, Farmgate, Dhaka-1215.
PERSONAL INFORMATION
Date of birth : December 31, 1978
Place of birth :Jamalpur.
Gender : Male.
Marital status : Single.
Fathers Name : Md. Abdul jalil.
Mothers Name : Mrs. Nasima Jalil.
Nationality : Bangladeshi.
Religion : Islam.
EDUCATION
Completed Post Graduate Diploma in Scientifics Instrumentation (PGDSI) (One year, 48 credits) from Institute of Scientific Instrumentation (ISI) under University Grants Commission of Bangladesh (UGC) and obtained A+, 2006.
Completed the course of Programmable Logic Controller (PLC) and Programmable Instruments from Training Institute for Chemical Industries (TICI) (Central Training Institute of BCIC), Polash, Narsingdi, Bangladesh and obtained A+, 2006.·Completed the course of Microcontroller & Applied Electronics from Bangladesh Advanced Institute of Science & Technology. House-21/E, Road-1, Nikunja-2, Dhaka-1229 and obtained A+, 2007.
Completed M.Sc in Physics from Uttara University and obtained First class, 2005.
Completed B.Sc (Honors) in Physics from Jagannath University and obtained Second Class, 1999.
Completed Higher Secondary Certificate (HSC) Science from Govt. Ananda Mohan College, Mymensingh and obtained First class under Dhaka Board, 1995.
Completed Secondary School Certificate (SSC) Science from Guthail High School and obtained First class under Dhaka Board, 1993.
THESIS & PROJECT
Motor Controller by PIC16F84A Microcontroller for Industrial & Medical Equipments.
Supervised by:
Dr. Khosru Mohammad Salim
Professor
Dept. of Computer Science & Engineering.
Independent University of Bangladesh. (IUB).
Automatic Battery Charger for Industrial & Medical Equipments.
Supervised by:
Engr. Md. Ziaul Haque
Associate professor
Institute of Scientific instrumentation (ISI)
Under University Grants Commission of Bangladesh (UGC).
Agargaon, Dhaka-1207.
Automatic Controller (PID Controller) by PLC & Microcontroller for Industrial & Medical Equipments.
Supervised by:
Muhammad Jaminur Rahaman
Assistant Professor
Institute of Scientific Instrumentation (ISI)
Under University Grants Commission of Bangladesh (UGC).
Agargaon, Dhaka-1207.
REFERENCE:
Professor Dr. Feroz Alam Khan
Chairman
Department of Physics
Bangladesh University of Energineering & Technology (BUET)·
Professor Dr. Jibon Pudder
Ex. Chairman
Department of Physics
Bangladesh University of Energineering & Technology (BUET)·
M. Fazlur Rahman
Chief National Commissioner of Bangladesh Scouts
ManagingDirector
Ahsania Mission Cancer & General Hospital
Former Secretary of Planning Ministry
Former Secretary of Health & Family Welfare
Former Secretary of Science & Technology
Peoples Republic of Bangladesh
(Muhammed Shahjahan Kabir)
Signature of the Applicant
dear sir,
i am laili marlina khaidir from malaysia..
i’m finishing my master degree in medical physics here in university science malaysia and i’m looking forward to further my study in PhD especially the course that related with my study.
As far as i’m concerned this programme closing date was august 2008, is there any chances for me to apply for this programme, as if i’ll finish my master degree in june-july next year (2009)..i’ll be hoping to hear from you soon
best regards
-laili marlina binti khaidir-
Dear Sir/Madam
I’m A.Ebrahimi. I study in the second term of M.S of nuclear reactor design in university of Iran
my research interests are in the field of design and analysis of advanced nuclear reactor systems and nuclear reactor safety
I will be happy if you please possibaly suggest me a topic which is your field of interest because in near future I have greater chance a maong those who want to work under your supervision
hopefully and enthusiastically I am looking forward to receiving you positive reply.
your sincerely
A.Ebrahimi
[email protected]
I am an MSc. graduate student in physics at Addis Ababa University, Ethiopia. My field of specialization is Laser Spectroscopy, I have selected this topic because it has relation with Medical Physics and medical physics is my best interest to join in your university. But as i can see the dead line for application has been passed. Please if you can accept me i will be very happy and you will find me very devoted and responsible to my field of study. I am waiting for your response.
thank you in advance
Dear professor
I am graduate of radiation medical from shiraz university. I performed my MS.c thesis entitled CT-based itracavitary brachytherapy treatment planning using Monte Carlo simulation
and TLD measurement for the first time in Iran. I was rank 1
amog students of my major. I am looking for a position to
continue my studing in medical physic. I’ll be glad if you
choose me as your student.
thank you
Dear sir,
I hold an MSc in Radiation Bio-physics in Jan. 2006. Lecturer in the department of Radiography, University of Maiduguri, borno state, nigeria. I am an MRI radiographer by training. I just read about your scholarships scheme which has expired. Please can i apply for next year’s selection for PhD in Medical Physics. My MSc thesis was on patient radiation dose on various radiological investigations in Ahmadu Bello University Teaching Hospital, Zaria.
Regards,
Emmanuel nwokorie
Dear Professor
I know that deadline time for application has ended. By the way please accept mine.
My name is Faraz Kalantari. I am graduated (MSc) in Medical Physics last year. I am also accepted in PhD enterance exam by first rank in Iran, but I prefer to continue my PhD in higher level research center.
I believe that my interests are very close to your suggested positions.
Would you please inform me if can apply to join your research group as PhD candidate?
If you think that I should contact another Professor please forward my Email to him.
I am sure that acording to my interest and motivation and also high
level of research in your department, it will be a very good start for
me.
Please find my brief CV as attachment.
Thank you in advance
Sicerely Yours
Faraz Kalantari
for give phd open position
sir i am boopathi now am doing second year msc physics with 80%
mark.i am interest do phd program in swertzerland.how apply and how get
scholarship. my interest subject is medical physics
Dear Sir,
I have MSc degree in medical physics from Isfahan university of medical sciences, Iran. I am looking for a scholarship for PhD. My MSc thesis was about preparation, quality control and biodistribution of 61Cu-ATSM for PET studies.
I am Ethiopian .I have complited my master degree in physics from AddisAbaba University. For the past three years I am working as lecturer in applied physics departemnet In one of university in the country.I am interested to study my PHD in your country if posible in Medical physics Nuclear or Radiation physics.Is there a possiblity to get free scholar ship in this fieled from your country for Ethiopian students?
Megersa kasim
Arbaminch university
Ethiopia
Subject: REQUEST FOR SCHOLARSHIP OF HIGHER STUDIES FOR DISABLED PERSON
Most Respectfully, I belong to a noble family and unfortunately a polio stricken Disable person but I am working perfectly As regards my educational qualification are concerned.
1. I am B.E (Electrical) Technology from Mehran university Egg: & Tech: first class (2001).
2. I did Diploma in Information Tech: from S.B.T.E, also preparation in MCSE Training and working as Trainee Engineer in different companies and also Two Year Experience.
3. I have also complete Master of Engineering (M.E) in (Telecommunication & control Engineering) in 2nd position.
4. Training in communication field in different topics wireless WiFi etc.. And 04 Year University Teaching Experience.
5. Best Research paper award from ICICT 08 international conference.
6. More than two international research papers.
7. Author of First Telemedicine & E-Health Book in Pakistan.
The skills and experience is a perfect match for the out side the country scholarship but unfortunately I have not received any scholarship for PhD studies. I would like to joined foreign university for Phd study but this dream still not successful.
I am requesting to you as a disabled person kindly give me the scholarship for higher study, so I am able to provide valuable research in the field of Science and information technology, during three year research I have delivered two international papers one in USA and second at UK.
For this reason, kindly help me for completion the PhD studies. So that, I am able to live with respectable citizen and provide advance information and knowledge to the up comming students of Sindh and Pakistan.
I would there for request you to kindly help me on Compassionate grounds being a special person. I request to you kindly provide scholarship for higher studies.
May God Bless you with a Long life…
Thanks
Your Sincerely
ENGR:NOMAN KHAN
S/o
MUNEERUDDINKHAN
Kindly contact as soon as possible
Address: House no:202/c, Block B,
Unit no:09 Latifabad Hyderabad, Sindh
Pakistan.
Cell No. No.0300-3081330.
Phone: 92-0221-3869548
Email address: [email protected]
Sir: I am a graduate of MSc. in Medical Physics from the University of Santo Tomas, Philippines. I want to pursue a PhD or DSc. in Medical Physics. In this connection I am looking for a scholarship grant that could provide for full TUITION FEE, LODGING AND LIVING EXPENSES as well as other incidental expenses.
iI have just read the scholarship grant for PhD student position in Switzerland and sad to say that the dedline was last August 2008, however if given a chance I am much willing to comply with the requirements very soon to be able to be included in the evaluation process.
At present I am connected with the Hospital Operations Management Service of the Provincial health Office , Province of Iloilo as Environmental Sanitation Engineer and at the same time Health Physicist of the 12 hospitals under the Province.
hope to hear from you soon.
Thanks. God Bless.
JOSEPHINE F. MARMOLEJO, MSc.
[email protected]
Dear Sir
I’m Kitiwat Khamwan,now, i try to looking for the grant in medical phisics from abroad country. I ‘m already have MSc.Medical Imaging from Chulalongkorn University, Thailand and my topic research was determination patient dose from PET/CT. During study, i have experience in clinical practice for medical physicist (3 months) and experience with CT scan about 5 years in hospital. I’m very intereting in your reserch topic in Ph.D program, would you mind directing me how to apply the scholarship, and i hope that i will getting chance from your university.
My best regards
Kitiwat Khamwan
Dear Sir,
I have fullfilled my M.Sc. degree in Physics from University of Peshawar, Pakistan securing “A” Grade. Also i have “A” Grade throughout my Academia. Sir I have a great interest in the study of medical Physics.
So please sir, i will be very thankfull to you, if you accept me as a Phd student.
I will be waiting for your reply
Thanks
sir i am boopathi now am doing second year msc physics with 80%
mark.i am interest do phd program in swertzerland.how apply and how get
scholarship. my interest subject is nuclear physics
sir i am boopathi now am doing second year msc physics with 80%
mark.i am interest do phd program inswertzerland.how apply and how get
scholarship. my interestsubjectis medical physics.
respected sir
,i m M.Phil in medical Physics with topic of i”nvestigation of Tray and Wedge factors for high energy of photons ” in bahawalpur institute of oncology.Pakistan.with practical work.
kindly ,accept me as Ph.D student in medical physics .
i have submitted my c.v and educational certificates.
[email protected]
i want to make master in medical physics department in switzerland but i have money problem so i have to find a financial support.i will gradute from university of Gaziantep and my department is engineering physics(applying physics) in Turkey.please contact me.i am waiting your answers. thanks and respects..
dear sir
I would like to express my a fmiration of your elegant fields of research. Iam Ammal Esmaeel Ibrahim female MSC. from Iraq Iam foyer to find an appartaimty to be involved as a full Time PhD. Student of your department. Iam seeking for a scholarship to cover tuition feeds and living expevses. I hope to accept my required and my wish come true to completing my study in chemistry science because I can not completing my study in iraq and I think you have idea a bout the situation in iraq and my family that consist of nine people make an another problem is the money problem. (Pleas can you help me to completing my study (PhD. in chemistry science). would you mind directing me learn to apply and if there is any opportunities for getting Scholarship from your University thank you to read my message pleas answer me as soon as possible
with my best regards.
Ammal Esmaeel Ibrahim
27-2-2008
emil: [email protected]